lPage 49
Resetting the Receiver
CHANGING THE RECEIVER PASSWORD
1. Press the Menu button.
2. Select the Locks option.
If the receiver is locked, enter the password using the number pad
buttons. The receiver displays stars (*) as you enter the digits of the
password. As soon as you enter the fourth digit of the password, the
receiver highlights the OK option.
3. Press the Select button.
4. Select the Change Password option.
5. Enter the current password using the number pad buttons.
As soon as you enter the fourth digit of the password, the receiver
highlights the OK option.
6. Press the Select button.
7. Enter the new password using the number pad buttons.
As soon as you enter the fourth digit of the password, the receiver
highlights the OK option.
8. Either: Select the OK option to change the password.
Or: If you do not want to change the password, press the Cancel button or
select the Cancel option. You can stop here.
9. Enter the new password again for checking, using the number pad
buttons. The receiver displays stars (*) as you enter the digits of the
password. As soon as you enter the fourth digit of the password, the
receiver highlights the OK option. Press the Select button.
Write down the new password and put it in a safe place. From now on,
you must enter this password to lock or unlock the receiver.
PERSONAL IDENTIFICATION NUMBER
You can set up a Personal Identification Number (PIN) for call-in requests
only. Anyone calling the Customer Service Center must provide this PIN to
make any changes to your account. You may call the Customer Service Center
at any time to set up a PIN.
If you forget your PIN, you will need to speak with a Customer Service
Representative. The representative may ask for more information to make
sure that you are authorized to make changes to your account.
RESETTING THE RECEIVER
If you want to reset the receiver to be the same as when it was shipped from
the factory, do the following:
To Next Page
Loading...