5.3.3 Edit User Rights
After the new user has been created, it will be selected in the list of users granted
No Access on the screen to the left. To grant this user access to the system; be
sure they are highlighted and click the right arrow to move them to the Access
list. Next you will want to setup what this user can do on the system. Do this by
assigning Server Rights to the user. These rights give you the fine-grained ability
to extend or limit access to your system. Below is a description of each right.
Additionally, you will want to select which cameras this user is able to access.
Server Rights
Administrator
The Admin right enables special Administrator features on the system. A
user that has the Admin right is able to control all aspects of the Setup
Screen including System, Users, Camera, Date/Time, and Network. They
are also able to access the Utilities and Playback sections.
Export
The export right allows the user to use the Utilities → Export screen.
From this screen, they will be able to export video off the system. If you
do not wish for users to take video off-site, you should disable this right.
Remote Viewing
The remote viewing right allows the user to view the cameras through a
web-browser. Without this right, they will get an access denied message.
PTZ Control
The PTZ Control right allows users to manipulate the Pan, Tilt and Zoom
functions of any cameras with this feature on the system.
Playback
The playback right allows the user to review recorded video.
27
To Next Page
Loading...