Lost Connection with Scale
If your NVS is not able to communicate with the scale, then this report
will be generated,
Restored Connection with Scale
Upon successfully reconnecting with a scale, this report will be generated
to notify you of the change.
Tare Weight Contamination
As the scale starts to increase from 0 (zero) weight, your NVS will
monitor it. Once the scale settles for the first time, we record this as the
Tare weight. If this weight is above your preconfigured threshold, then
this report will be generated. It will tell you what your threshold is and
what the actual Tare weight reading was.
No Ticket
If a truck was on the scale and drives off, but your NVS never receives a
ticket from the Apex system, then a No Ticket report is generated. If we
generated a Tare Weight Contamination report, then we will skip this
report so you don't get a false alarm if you told the truck to go unload the
old product.
Gross Ticket Weight Mismatch
Once a ticket is generated, we will compare the weight on the ticket with
our maximum weight reading on the scale. If those weights differ by
more than your preconfigured threshold, then this report will be
generated.
Overweight Truck
Your NVS system will monitor the scale weight as you are filling the
product. If the maximum weight on the scale goes above your overweight
threshold, an overweight report will be generated.
39
To Next Page
Loading...