dixell iCHILL IC200CX - 1 General Warning; Please Read before Using this Manual; Safety Precautions

1592022760 Quick reference guide iCHILL 200CX EVO rel. 1.0 5/40
1 GENERAL WARNING
1.1 PLEASE READ BEFORE USING THIS MANUAL
 This manual is part of the product and should be kept near the instrument for easy and
quick reference.
 The instrument shall not be used for purposes different from those described
hereunder. It cannot be used as a safety device.
 Check the application limits before proceeding.
 Dixell Srl reserves the right to change the composition of its products, even without
notice, ensuring the same and unchanged functionality.
1.2 SAFETY PRECAUTIONS
 Check the supply voltage is correct before connecting the instrument.
 Do not expose to water or moisture: use the controller only within the operating limits
avoiding sudden temperature changes with high atmospheric humidity to prevent
formation of condensation
 Warning: disconnect all electrical connections before any kind of maintenance.
 The instrument must not be opened.
 In case of failure or faulty operation send the instrument back to the distributor or to
“Dixell S.r.l.” with a detailed description of the fault.
 Consider the maximum current which can be applied to each relay (see Technical
Data).
 Ensure that the wires for probes, loads and the power supply are separated and far
enough from each other, without crossing or intertwining; do not use the same electrical
conduit to install high voltage cabling and low voltage cabling.
 The ground connection of the secondary coil of the transformer that powers the device
can result in a bad performance; where possible, this connection should be avoided.
 Fit the probe where it is not accessible by the end user.
 In case of applications in industrial environments, the use of mains filters (our mod.
FT1) in parallel with inductive loads could be useful.
 The symbol alerts the user of non-insulated “dangerous voltage” within the
product area that is sufficiently high to constitute a risk of electric shock to persons.
 The symbol alerts the user of important operating and maintenance
(assistance) instructions found in the documentation attached to the device.