dji Matrice 100 - GPS Module Installation

16
©
2015 DJI. All Rights Reserved.
DJI MATRICE 100 User Manual
2. Mount the expansion bay onto the mounting rails and tighten the four screws (M2.5x5).
Alternatively, mount the expansion bay onto the battery compartment and tighten the four screws
(M3x5). The two mounting methods are illustrated in the gures below.
Mounting the expansion bay onto
the mounting rails
Mounting the expansion bay onto
the battery compartment
3. Join two adjacent expansion bays using four screws (M3x5) as shown below.
Mounting the GPS Module
Other Mounting Position
M1
M2
1. Mount the collapsible GPS mount onto either
side of the center frame using M2.5×8 screws.
2. Use the extension rod to attach the GPS
module to the collapsible GPS mount. Ensure
the arrow on the GPS module points to the
nose of the aircraft (M1, M2). Avoid catching
your fingers in the bracket when folding the
collapsible GPS mount for transportation.