dji Matrice 100 - DJI Guidance System Mounting Warning

©
2015 DJI. All Rights Reserved.
75
DJI MATRICE 100 User Manual
DJI Guidance System Mounting Warning
1. If you mount the Guidance Sensors directly under the battery compartment, disconnect the cable
of the rear facing Guidance Sensor before accessing the Intelligent Flight Battery.
2. If you mount the side Guidance Sensors above the center frame, ensure they are mounted at
least 4 cm above the center frame, so that the propellers will not obstruct them. Be sure to mount
the down facing Guidance Sensor under the aircraft. Finally, mount the GPS mount on top of the
expansion bay using two M3x8 screws.
3. If you are using the DJI Zenmuse X3 Gimbal with Camera and the DJI Guidance system together,
be sure to mount the side Guidance Sensors above the center frame, otherwise you will be unable
to mount the front facing Guidance Sensor.
>4cm