dji Matrice 100 - Remote Controller Powering and Charging

32
©
2015 DJI. All Rights Reserved.
DJI MATRICE 100 User Manual
Remote Controller Operation
Powering On and Off the Remote Controller
The M100 remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh.
The battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to
power on/off your remote controller:
1. Press the power button once. The Battery Level LEDs will display the current battery level.
2. Press again and hold to power on the remote controller.
3. The remote controller will beep when it powers on. The Status LED will blink green rapidly,
indicating that the remote controller is linking to the aircraft, then turn solid green when linking is
complete.
4. Press twice and hold the power button to power off the remote controller.
Charging the Remote Controller
Charge the remote controller via the provided charger.
Charger
Power Outlet