dji Matrice 100 - Remote Controller Status LED

©
2015 DJI. All Rights Reserved.
39
DJI MATRICE 100 User Manual
MasterOFF
Slave
RC Control Settings
Set RC Status
RC Name
Search for Master Controller
Request Control
Master RC List
Master and Slave
S88642
T12254
RC Settings
2. Tap Search for Master Controller to register the Master remote controller.
3. Select the name of the remote controller from the Master RC List and input the connection
password to connect to the desired Master remote controller.
RC Control Settings
Set RC Status
Slave RC List
Master and Slave
RC Settings
MasterOFF
RC Name Connection Password
T12254 1234
Slave
主机
从机关闭
主机列表
名称
主从机功能
S88642
遥控器设置
设置遥控器状态
请求控制权
搜索主机
遥控器功能设置
T12254
RTH LED
Status LED
Remote Controller Status LED
The Status LED indicates the connection status between the remote controller and the aircraft. The
RTH LED indicates the Return-to-Home status of the aircraft. See the table below for details on these
indicators.
The remote controller cannot link to the aircraft or control aircraft movement if it is set to Slave.
Set the remote controller as Master in the DJI Pilot app if you want to link the remote controller
to the aircraft.