dji Matrice 100 - Page 46

46
©
2015 DJI. All Rights Reserved.
DJI MATRICE 100 User Manual
[1] Flight Mode
: The text next to this icon indicates the current ight mode.
Tap this icon to congure the MC (Main Controller) Settings, to change the ight limits and set the
gain values.
When using the DJI Pilot app for the rst time, the aircraft is in Beginner Mode. In this mode,
the ight altitude and ight distance are set to 30 m. Tap
to exit Beginner Mode.
[2] GPS Signal Strength
: Shows the current GPS signal strength. Green bars indicate adequate GPS strength.
[3] IOC Settings
CL: Displays the IOC settings when the aircraft has entered F-Mode. Tap this icon to view the
IOC menu and select the desired IOC mode.
[4] System Status
: Indicates the current aircraft system status and GPS signal strength.
[5] Battery Level Indicator
: Describes the battery level of the aircraft according to its immediate status. The colored
zones represent the various stages of battery level. When the battery level drops to a certain
stage, the system will prompt the user to take the appropriate action.
[6] Remote Controller Signal
: Shows the signal strength of the remote controller.
[7] HD Video Link Signal Strength
: Shows the signal strength of the HD video downlink between the aircraft and the remote
controller.
[8] Battery Level
: Shows the current battery level.
Tap this icon to view the battery information menu where you can set the battery warning
thresholds and view the battery log.
[9] General Settings
: Tap this icon to view General Settings where you can set the flight parameters, reset the
camera settings, enable the Quick Review function, adjust the Gimbal Roll value, and enable the
Flight Route display.
[10] Camera Operation Bar
Shutter and Recording Settings
: Tap this icon to enter various camera value settings including the Color mode, Video Size,
and Image Size.
Shutter
: Tap this button to take a single photo. Press and hold this button to switch between Single
Shot, Triple Shot and Timed Shot modes.