(ID
Dlsclalmer
and
Warning
Congratulations
on
purchasing
your
new
DJI™
product.
The
information in this document affects your safety
and
your legal rights and responsibilities.
Read
this entire document carefully to ensure proper configuration
before
use.
Failure to read and follow instructions and warnings
in
this document may result
in
serious injury to
yourself
or
others, damage to
your
DJI
product,
or
damage to other objects
in
the vicinity.
This
document
and
all
other collateral documents
are
subject to change
at
the
sole discretion of
DJI.
By using this product,
you
hereby signify that
you
have
read
this disclaimer and warning carefully
and
that
you
understand and agree to abide by the
terms
and conditions
herein.
You
agree that
you
are
solely
responsible
for your own conduct while using this product, and for any consequences thereof.
You
agree to use this
product only
for
purposes that
are
proper and
in
accordance
with
all applicable
laws,
rules,
and
regulations.
and all
terms,
precautions, practices, policies and guidelines
OJI
has
made and may
make
available.
DJI accepts no liability
for
damage,
injury or any legal responsibility incurred directly or indirectly from the
use of this product.
The
user shall observe safe and lawful practices including, but not limited
to,
those
set
forth in this document.
Notwithstanding
above,
your statutory rights under applicable national legislation are not affected
by
this
disclaimer.
DJI is a trademark of
SZ
DJI
TECHNOLOGY
CO.,
LTD.
(abbreviated
as
•oJI") and its affiliated companies.
Names
of products, brands, etc., appearing in this document are trademarks or registered trademarks of their
respective owner companies. This product and document
are
copyrighted
by
DJI
with
all rights reserved.
No part
of
this product or document shall
be
reproduced in any form without prior written consent of or
authorization
from
DJI.
Introduction
The Single
Downward
Gimbal
Connector
is
used to
mount
a compatible
camera
to the
bottom
of
the aircraft.
The
ZENMUSE™
X5S,
X4S.
xr and 230
are
supported.
In
the
Box
Single
Downward
Gimbal Connector x 1
•
Use
the
Zenmuse
XT
Gimbal
Adapter
to
mount
the
Zenmuse
XT
gimbal
to
aircraft.
2
To Next Page
Loading...
