dji MATRICE 200 series

72
©
2018 DJI All Rights Reserved.
MATRICE 200 Series User Manual
Flight Test
Takeoff/Landing Procedures
 1MBDFUIFBJSDSBGUJOBOPQFOnBUBSFBXJUIUIFCBUUFSZMFWFMJOEJDBUPSTGBDJOHUPXBSETZPV
2. Turn on the remote controller and your mobile device, then turn on the Intelligent Flight Battery.
3. Launch DJI GO 4 and enter the Camera View.
4. Wait until the Aircraft Indicators blink green. This means the Home Point has been recorded and
JUJTOPXTBGFUPnZ*GUIFZnBTIZFMMPXUIF)PNF1PJOUIBTOPUCFFOSFDPSEFE
5. Turn on the motors using CSC and push the left stick up slowly or use Auto Takeoff to take off.
6. Shoot photos and videos using the DJI GO 4 app.
7. To land, hover over a level surface and gently pull down on the left stick to descend.
8. After landing, execute the CSC command or hold the left stick at its lowest position until the mo-
tors stop.
 5VSOPGGUIF*OUFMMJHFOU'MJHIU#BUUFSZmSTUUIFOUIFSFNPUFDPOUSPMMFS
8IFOUIF"JSDSBGU4UBUVT*OEJDBUPSTCMJOLZFMMPXSBQJEMZEVSJOHnJHIUUIFBJSDSBGUIBTFOUFSFE'BJMTBGF
mode.
A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly
PSSBQJEMZEVSJOHnJHIU
8BUDIPVSWJEFPUVUPSJBMTGPSNPSFnJHIUJOGPSNBUJPO
Video Suggestions and Tips
 (PUISPVHIUIFGVMMQSFnJHIUDIFDLMJTUCFGPSFFBDInJHIU
2. Select the desired gimbal operation mode in the DJI GO 4 app.
 0OMZTIPPUWJEFPXIFOnZJOHJO1NPEF
 "MXBZTnZJOHPPEXFBUIFSBOEBWPJEnZJOHJOSBJOPSIFBWZXJOE
5. Choose the camera settings that suit your needs. Settings include photo format and exposure
compensation.
 1FSGPSNnJHIUUFTUTUPFTUBCMJTInJHIUSPVUFTBOEQSFWJFXTDFOFT
7. Push the control sticks gently to keep the aircraft’s movement smooth and stable.
Please check that CSC is activated inside DJI GO 4 app, then the user can stop the
aircraft mid-air.
*UJTJNQPSUBOUUPVOEFSTUBOECBTJDnJHIUHVJEFMJOFTGPSUIFTBGFUZPGCPUIZPVBOE
those around you.
Refer to the Disclaimer and Safety Guidelines for more information.