dji MATRICE 200 series

20
©
2018 DJI All Rights Reserved.
MATRICE 200 Series User Manual
Follow the steps below to use the Vision System:
&OTVSFUIFBJSDSBGUJTJO1NPEFBOEQMBDFUIFBJSDSBGUPOBnBUTVSGBDF/PUF
that the Vision System cannot work properly on surfaces without clear pattern
variations.
2. Turn on the aircraft. The aircraft will hover in place after takeoff. The aircraft
status indicators will flash green twice, which indicates the Vision System is
working. Gently push the left stick up to lift off and the aircraft will hover in place.
Assisted Braking from Obstacle Sensing
Powered by the Forward Vision System, the aircraft is able to actively brake when obstacles are
detected in front. Obstacle Sensing works best when lighting is adequate and the obstacle is
DMFBSMZUFYUVSFE5IFBJSDSBGUNVTUnZBUOPNPSFUIBONQILQIUPBMMPXGPSTVGmDJFOUCSBLJOH
distance.
Using Infrared Sensing System
The Infrared Sensing System can only be used to avoid large, diffuse, and reflective obstacles
SFnFDUJWJUZ1MFBTFCFNJOEGVMPGCMJOETQPUT(SFZPGUIF*OGSBSFE4FOTJOH4ZTUFN