dji MATRICE 200 series

28
©
2018 DJI All Rights Reserved.
MATRICE 200 Series User Manual
5IFBJSDSBGUBVUPNBUJDBMMZBEKVTUTJUTTQFFEXIFOJUTFOTFTBOPCTUBDMFJOGSPOUPSJGJUnJFTUPPDMPTF
UPUIFHSPVOE5IF%+*(0BQQXJMMTIPXBQSPNQUJGUIFBJSDSBGUnJFTPWFSBOPCTUBDMFPSUPUIF
left or right of the obstacle. However, this feature should not be relied upon for navigation between
obstacles. Failsafe procedures will override TapFly. If the GPS signal weakens, the aircraft will exit
BVUPOPNPVTnJHIUBOESFUVSOUPIPNF
Exit TapFly
Use the following methods to exit TapFly:
1. Tap the “
” icon on the screen.
2. Pull back the pitch stick on the remote controller and hold for three seconds or more..
3. Press the Intelligent Flight Pause button on the remote controller.
OR OR
Pause button
30M
30M
2 meters
5IFBJSDSBGUXJMMTUPQBOEIPWFSBGUFSFYJUJOHGSPN5BQ'MZ5BQBOFXUBSHFUEJSFDUJPOUPDPOUJOVFnZJOHPS
CFHJONBOVBMnJHIU
ActiveTrack
ActiveTrack allows you to mark and track a moving object on your mobile device's screen. The
BJSDSBGUXJMMBVUPNBUJDBMMZBWPJEPCTUBDMFTJOJUTnJHIUQBUI/PFYUFSOBMUSBDLJOHEFWJDFJTSFRVJSFE
The aircraft will automatically identify and trace bicycles and other vehicles, people, and animals,
using different tracking strategies for each.
Using ActiveTrack
Ensure the Intelligent Flight Battery is fully charged and the aircraft is in P Mode. Follow the steps
below to use ActiveTrack:
1. Take off and hover at least 6 feet (2 meters) above the ground.