dji MATRICE 200 series

52
©
2018 DJI All Rights Reserved.
MATRICE 200 Series User Manual
When in Slave, the remote controller cannot link to the aircraft nor control aircraft orientation.
Select Master in DJI GO 4 if you wish to connect and control the aircraft with the remote
controller.
2. Search the “Master” remote controller in the surrounding area.
“Slave” Remote Controller:
1. Select Slave to set the remote controller to Slave.
Search Master
Remote Controller Settings
Master and Slave
Set Remote Controller Status
Master
Slave
OFF
Master ID: 28172d Slave ID: 14f93f
Connection Status:OFF
3. Select the Master remote controller from the Master list and input the password to connect.
G
E

344*

Search Master
Master
Scan
Connect
Connect
Search Master
Remote Controller Settings
Master and Slave
Set Remote Controller Status
Master
Slave
OFF
Master ID: 28172d Slave ID: 14f93f
Connection Status:OFF