dji MATRICE 200 series

86
©
2018 DJI All Rights Reserved.
MATRICE 200 Series User Manual
Mount the GPS module.
Remove the D-RTK
antenna from the
aircraft’s left side and
mount the GPS module.
Connect the GPS module
to the CAN Bus Port (in
the expansion ports)
ensuring that the side
with the arrows is facing
upward.
Connect the GPS module
to the CAN Bus Port (in
the expansion ports)
ensuring that the side
with the arrows is facing
upward.
Mount the
upward gimbal,
and connect it to
the DGC2.0 port.
Mount the
upward gimbal,
and connect it to
the DGC2.0 port.
4HRLZ\YL`V\ZLJ\YL[OL.7:TVK\SLHUK\W^HYKNPTIHS»ZJHISLZ^P[O[OLJHISLJSHTWZMVY
ZHML[`
5V[L[OH[[OL^OVSLHPYJYHM[^PSSUV[YL[HPUP[Z07YH[PUNPM[OL.7:TVK\SLPZPUZ[HSSLK
:PUNSL\W^HYKNPTIHSJVUULJ[VYHUKK\HSKV^U^HYKNPTIHSJVUULJ[VYZOV\SKIL\ZLK
ZLWHYH[LS`+656;\ZL[OLTH[[OLZHTL[PTL
%0/05USZUPSFNPWFUIF(14BOUFOOBXJUIPVUmSTUSFNPWJOHUIFGPVSTDSFXTUIBUIPMEJUJOQMBDF
as doing so could damage the antenna.
Follow the steps below to mount the Upward Gimbal and GPS Module on the M210:
Follow the steps below to mount the Upward Gimbal and GPS Module on the M210 RTK: