DJI Mavic 3 Classic User Manual
11
©
2022 DJI All Rights Reserved.
Preparing the Remote Controller
Follow the steps below to prepare to use the DJI RC remote controller.
1. Remove the control sticks from the storage slots and mount them on the remote controller.
2. The remote controller needs to be activated before first use and an internet connection is
required for activation. Press, and then press again and hold the power button to power on
the remote controller. Follow the on-screen prompts to activate the remote controller.
Follow the steps below to prepare the DJI RC-N1 remote controller.
1. Remove the control sticks from their storage slots on the remote controller and screw them
into place.
2. Pull out the mobile device holder. Choose an appropriate remote controller cable based on
the type of mobile device. A Lightning connector cable, Micro USB cable, and USB-C cable are
included in the packaging. Connect the end of the cable with the phone icon to your mobile
device. Make sure the mobile device is secured.
2
1
2
1
2
1
• If a USB connection prompt appears when using an Android mobile device, select the
option to charge only. Otherwise, it may fail to connect.
To Next Page
Loading...
Need help?
General
