DJI Mavic 3 Classic User Manual
72
©
2022 DJI All Rights Reserved.
Flight Limits DJI Fly App
Max Altitude
Aircraft's altitude cannot exceed the specified
value
Warning: Height limit
reached
Max Radius Flight distance must be within the max radius
Warning: Distance limit
reached
Only Downward Vision System is available
Flight Limits DJI Fly App
Max
Altitude
Height is restricted to 30 m when the GNSS signal is
weak. Height is restricted to 3 m when the GNSS signal
is weak and light conditions is not sufficient.
Warning: Height limit
reached.
Max
Radius
The restrictions on the radius are disabled and warning prompts cannot be
received in the app.
• The altitude limit when the GNSS is weak will not be restricted if there was a strong
GNSS signal when the aircraft was powered on.
• If the aircraft reaches a limit, you can still control the aircraft, but you cannot fly it any
further. If the aircraft flies out of the max radius, it will automatically fly back within
range when the GNSS signal is strong.
• For safety reasons, do not fly close to airports, highways, railway stations, railway lines,
city centers, or other sensitive areas. Fly the aircraft only within your line of sight.
GEO Zones
All GEO zones are listed on the DJI official website at http://www.dji.com/flysafe/geo-map. GEO
zones are divided into different categories and include locations such as airports, flying fields
where manned aircraft operate at low altitudes, borders between countries, and sensitive
locations such as power plants. There will be prompts in the DJI Fly app to fly in GEO zones.
Pre-Flight Checklist
1. Make sure the remote controller, mobile device, and Intelligent Flight Battery are fully
charged.
2. Make sure the Intelligent Flight Battery and the propellers are mounted securely.
3. Make sure the aircraft arms are unfolded.
4. Make sure the gimbal and camera are functioning normally.
5. Make sure that there is nothing obstructing the motors and that they are functioning
normally.
6. Make sure that DJI Fly is successfully connected to the aircraft.
7. Make sure that the camera lens and Vision System sensors are clean.
When GNSS is available
To Next Page
Loading...
Need help?
General
