DJI Mavic 3 Classic User Manual
41
©
2022 DJI All Rights Reserved.
Using the Battery
Checking Battery Level
Press the power button once to check the battery level.
Battery Level LEDs
: LED is on
: LED is flashing : LED is off
LED1 LED2 LED3 LED4
Battery Level
Battery Level ≥ 88%
75% ≤ Battery Level < 88%
63% ≤ Battery Level < 75%
50% ≤ Battery Level < 63%
38% ≤ Battery Level < 50%
25% ≤ Battery Level < 38%
13% ≤ Battery Level < 25%
0% ≤ Battery Level < 13%
Powering On/Off
Press the power button once, then press again, and hold for two seconds to power the battery
on or off. The battery level LEDs display the battery level when the aircraft is powered on.
Low Temperature Notice
1. Battery capacity is significantly reduced when flying in low-temperature environments of -10°
to 5° C (14° to 41° F). It is recommended to hover the aircraft in place for a while to heat the
battery. Make sure to fully charge the battery before takeoff.
2. Batteries cannot be used in extremely low-temperature environments of lower than -10° C
(14° F).
3. When in low-temperature environments, end the flight as soon as DJI Fly displays the low
battery level warning.
4. To ensure the optimal performance of the battery, keep the battery temperature above
20° C (68° F).
LED
1
LED
2
LED
3
LED
4
Power Button
To Next Page
Loading...
Need help?
General
