DJI Mavic 3 Classic User Manual
39
©
2022 DJI All Rights Reserved.
Propellers
There are two types of DJI Mavic 3 Classic Low-Noise Quick Release Propellers, which are
designed to spin in different directions. Marks are used to indicate which propellers should
be attached to which motors. Make sure to match the propeller and motor following the
instructions.
Attaching the Propellers
Attach the propellers with marks to the motors with marks and the unmarked propellers to the
motors without marks. Press each propeller down onto the motor and turn until it is secure.
B A
A B
1
2
Detaching the Propellers
Press the propellers down onto the motors and rotate them in the unlock direction.
• Propeller blades are sharp. Handle with care.
• Only use official DJI propellers. DO NOT mix propeller types.
• Purchase the propellers separately if necessary.
• Make sure that the propellers are installed securely before each flight.
• Make sure all propellers are in good condition before each flight. DO NOT use aged,
chipped, or broken propellers.
• Stay away from the rotating propellers and motors to avoid injuries.
• DO NOT squeeze or bend the propellers during transportation or storage.
• Make sure the motors are mounted securely and rotating smoothly. Land the aircraft
immediately if a motor is stuck and unable to rotate freely.
• DO NOT attempt to modify the structure of the motors.
• DO NOT touch or let your hands or body come in contact with the motors after flight
as they may be hot.
• DO NOT block any of the ventilation holes on the motors or the body of the aircraft.
• Make sure the ESCs sound normal when powered on.
To Next Page
Loading...
Need help?
General
