MAVIC 2 ENTERPRISE Advanced
User Manual
26
©
2021 DJI All Rights Reserved.
Using the Battery
Battery Level LEDs Power Button
Low
High
Refer to the Mavic 2 Intelligent Flight Battery Safety Guidelines before use. Users take full
responsibility for all operations and usage.
Checking Battery Level
The battery level LEDs display how much charge is remaining. If the battery is powered o, press the
power button to make the battery level LEDs light up to display the current battery level.
Powering On/O
Press the power button once and press and hold for two seconds to power the battery on or o.
Heating the Battery
Manual Heating: make sure the battery is powered off. Press and hold the power button for five
seconds to warm up the battery manually.
As the battery warms up, the brightness of the battery level LEDs will change from no light, low light,
medium light, to high light. The battery will stop warming up when it reaches 46° F (8° C) and the
battery level LEDs will blink clockwise, indicating that the battery temperature is between 46° to 50° F
(8° to 10° C). This will last for approximately 20 minutes before the battery automatically powers o.
Auto Heating: insert the battery into the aircraft and power it on. When the temperature of the battery
is below 43° F (6° C) and the battery level is above 45%, it will warm up automatically and the
temperature will remain between 46° to 50° F (8° to 10° F).
Low Temperature Notice
1. Battery capacity is signicantly reduced when ying in low-temperature environments of -4° to 41° F
(-20° to 5° C). It is recommended to heat the battery before use and make sure to fully charge the
battery before takeo.
2. Batteries cannot be used in extremely low-temperature environments of less than -4° F (-20° C).
3. To ensure the optimal performance of the battery, warm up the battery so the temperature is
above 46° F (8° C) before use.
4. Reduced battery capacity in low-temperature environments reduces the wind speed resistance of
the aircraft. Fly with caution.
5. Fly with extra caution at a high sea level.
6. The heating function cannot be initiated when the battery temperature is higher than 43° F (6° C)
or the battery level is lower than 45%.
7. When the temperature is below -4° F (-20° C), low temperature protection will be triggered and
the battery will not power on. The aircraft exits low temperature protection when the battery
temperature reaches 5° F (-15° C).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
