EasyManuals Logo

dji MAVIC 2 ZOOM User Manual

dji MAVIC 2 ZOOM
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Mavic 2 Pro/Zoom User Manual
©
2018 DJI All Rights Reserved.
15
Smart RTH
If the GPS signal is suciently strong, Smart RTH can be used to bring the aircraft back to the Home
Point. Smart RTH is initiated either by tapping in the DJI GO 4 app (and following the on-screen
instructions) or by pressing and holding the RTH button on the remote controller.
Exit Smart RTH by tapping in the DJI GO 4 app or by pressing the RTH button on the remote
controller.
Low Battery RTH
Low Battery RTH is triggered when the Intelligent Flight Battery is depleted to the point that the safe
return of the aircraft may be aected. Return home or land the aircraft immediately when prompted. DJI
GO 4 will display a warning when a low battery level warning is triggered. The aircraft will automatically
return to the Home Point if no action is taken after a ten-second countdown. The user can cancel the
RTH procedure by pressing the RTH button or Flight Pause button on the remote controller.
If the RTH procedure is cancelled following a low battery level warning, the Intelligent Flight Battery may
not have enough charge for the aircraft to land safely, which may lead to the aircraft crashing or being
lost. The thresholds for the battery level warnings are automatically determined based on the aircraft’s
current altitude and distance from the Home Point.
The aircraft will land automatically if the current battery level can only support the aircraft long enough
to descend from its current altitude. The user cannot cancel the auto landing but can use the remote
controller to alter the aircraft’s orientation during the landing process.
Return to Home
The Return to Home (RTH) function brings the aircraft back to the last recorded Home Point. There are
three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three
scenarios in detail.
GPS
Description
Home Point
If a strong GPS signal was acquired before takeoff, the Home Point is
the location from which the aircraft launched. The GPS signal strength is
indicated by the GPS icon ( ). The Aircraft Status Indicator will blink
green quickly when the Home Point is recorded.
Critically low battery level warning
(Red)
Low battery level warning
(Yellow)
Battery level is
sufficient (Green)
Remaining flight time
Charge required to
return to Home Point
12:29
DJI GO 4 Battery level Indicator Bar

Other manuals for dji MAVIC 2 ZOOM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji MAVIC 2 ZOOM and is the answer not in the manual?

dji MAVIC 2 ZOOM Specifications

General IconGeneral
Megapixel12 MP
Sensor typeCMOS
Video resolutions1920 x 1080, 3840 x 2160 pixels
Maximum frame rate120 fps
Optical sensor size1/2.3 \
Camera shutter speed8 – 1/8000 s
Streaming capabilityYes
Supported video modes1080p, 2160p
Image formats supportedDNG, JPEG, RAW
Video formats supportedAVC, H.264, H.265, HEVC, MOV, MP4
Maximum image resolution4000 x 3000 pixels
Maximum video resolution3840 x 2160 pixels
Field of view (FOV) angle83 °
Bitrate at maximum video resolution100 Mbit/s
Built-in processor-
TypeQuadcopter
Product colorGray
Construction typeReady-to-fly (RTF)
Moving control functionsBackward, Downward, Forward, Turn left, Turn right
USB ports quantity1
Operating frequency2400 - 2483, 5725 - 5850 MHz
Maximum device width160 mm
Maximum speed20 m/s
Frequency band2.400 - 2.483, 5.725 - 5.850 GHz
Number of axis3
Number of rotors4 rotors
Maximum tilt angle35 °
Hovering time (max)29 min
Maximum flight time31 min
Maximum ascent speed5 m/s
Maximum descent speed3 m/s
Maximum weight capacity- kg
Maximum wind resistance10 m/s
Vertical hover accuracy0.5 m
Horizontal hover accuracy1.5 m
Maximum operating distance8000 m
Maximum pitch angular velocity200 °/sec
Battery voltage15.4 V
Battery capacity3850 mAh
Transmitter battery capacity3950 mAh
Output power60 W
AC adapter power80 W
AC adapter frequency50/60 Hz
AC adapter input voltage100 - 240 V
AC adapter output current3.41 A
AC adapter output voltage17.6 V
Equivalent Isotropically Radiated Power (EIRP)26 dBmW
Operating temperature (T-T)-10 - 40 °C
Cables includedLightning, Micro-USB, USB Type-C
Internal memory8 GB
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size128 GB
Weight and Dimensions IconWeight and Dimensions
Depth322 mm
Width242 mm
Height84 mm
Weight905 g
Battery weight297 g

Related product manuals