dji OSMO MOBILE 7 - Maintenance

5 Maintenance
• Put out any product re using water, sand, re blanket, or a dry powder re
extinguisher.
• Never disassemble or pierce the product in any way or the battery may leak,
catch re, or explode.
• It is recommended to use a soft, dry cloth to clean the product.
• When the phone is attached to the gimbal, the compass feature of the phone
may experience interference. In such cases, calibrate the compass according to
the prompts in the phone.
• The NFC (near-eld communication) and wireless charging functions of the
phone may be aected when the phone clamp is attached. These functions will
no longer be aected once the phone clamp has been removed from the phone.
• The built-in extension rod contains a spring. If the extension rod is extended for
more than a week, the spring may become deformed and the extension rod can
no longer be used normally. It is recommended to retract the extension rod and
fold the gimbal after use.
* Only Osmo Mobile 7P has a built-in extension rod.
Osmo Mobile 7 / 7P User Manual
© 2025 DJI All Rights Reserved. 29