16
Figure: RTK settings
If a network RTK signal is available in the mapping area or the D-RTK 2 Mobile Station has been
set up at a known point, you can enable RTK Positioning to obtain differential data. In this case,
you are recommended to disable the Maintain Positioning Accuracy Mode.
RTK service types include D-RTK 2 Mobile Station and Custom Network RTK. In this example,
when the status bar shows "RTK connected. RTK data in use" and the aircraft positioning is shown
as FIX, the RTK is ready to use.
Figure: RTK connection success
To Next Page
Loading...
Need help?
General
