dji ZENMUSE L2 User Manual

56
3.2.3.3.2. Parameter List (Can Be Printed and Used as a Checklist)
Parameter Name
Parameter Value
Flight
Controller
Settings
RTH Altitude
□
30-50 meters higher than the obstacles in the
RTH segment of the route
RC Signal Lost
□
RTH
Obstacle Sensing
Settings
□
On
Smart RTH
□
On
RTK Positioning
□
Off
Route
Homepage
Settings
Select Aircraft
□
Matrice 350 RTK
Select Payload
□
Gimbal 1: Zenmuse L2
ASL/ALT
□
ASL (EGM96)
Payload
Settings
Return Mode
□
Dual
Sampling Rate
□
240 kHz
Scanning Mode
□
Non-repetitive
RGB Coloring
□
On
Route Settings
Speed
□
Main Grid: 15 m/s
Distribution Grid: 12-15 m/s
Altitude
□
Use the default value and do not modify it.
Aircraft Yaw
□
Along Route
Gimbal Control
□
Manual Control by RC
Waypoint Type
□
Straight route. Aircraft stops
IMU Calibration
□
On
Power Saving
Mode
□
Off
Finish Action
□
Return To Home
Waypoint
Settings
Speed
□
Follow Route
Altitude
□
Does not follow route
Aircraft Yaw
□
Follow Route
Waypoint Type
□
Follow Route
Action at the first
waypoint
□
h) Gimbal Pitch: -75°
i) Start point cloud modeling recording
Middle Waypoint
□
Use the default values and do not modify them.
Action at the last
waypoint
□
Finish point cloud modeling recording
Latitude and
Longitude
□
Use the default values and do not modify them.

dji ZENMUSE L2 Specifications

General

Brand	dji
Model	ZENMUSE L2
Category	Drone & Quadcopter Accessories
Language	English