59
3.2.3.5. Point Cloud Playback
Tap the playback icon and select Point Cloud in the top bar.
Figure: Filter point clouds
Recorded point cloud files and photos are displayed (The RGB coloring feature needs to be
enabled). You can select one or more point cloud files and download them to the remote controller.
(Make sure that the remote controller has sufficient storage space before the download.)
After the download is complete, tap to preview the point cloud files. Tap the playback icon to view
model details. You can move the model on the screen with one finger. You can tap and hold with
two fingers to rotate the model (slide up or down to rotate the model around the x-axis; slide left
or right to rotate the model around the z-axis). You can also slide diagonally with two fingers to
zoom the model in or out.
Figure: Model viewing
Press the L3 button on the remote controller to enter the model selection screen. Select and
download multiple point cloud files and merge the files. Then, you can quickly view the overall
effect of the merged files and locate the positions where the cloud point effects are poor.
Make sure the aircraft and the remote controller are connected when viewing the point cloud
models. A point cloud file less than 2 KB in size cannot be processed. Make sure that point cloud
models are effective.
To clear the cache, enter the album to select and delete the downloaded files or tap Data and
Privacy on the homepage and then tap DJI Pilot Cache Management to clear all downloaded point
cloud data files.
3.2.3.6. Merging of Point Cloud Models
Point cloud 3D models collected from multiple flight tasks can be merged as follows: Press the L3
button on the remote controller to enter the model selection screen. Select and download multiple
point cloud files and merge the files. Then, you can quickly view the overall effect of the merged
To Next Page
Loading...
Need help?
General
