2
Type Ⅰ Knob: The knob of Digital Overhead Stirrer can be rotated and pressed. There is no stop
point when it is rotated. The target parameters are usually set by rotating, and the function is
started by pressing;
Type Ⅱ Knob: The knob of Standard Overhead Stirrer can be rotated. There is a stop point when
being rotated and only can be rotated more than half a circle. The target parameters are set by
rotating, by which the function is started;
1.2 Structure
FIG.4
FIG.5
To Next Page
Loading...
