What does it mean when safety 4 is open during travel in DMG Pitagora 4.0?
If 'Safety 4' is open during travel in your DMG Control Systems, check all contacts between the terminals SD1 and SD2 (Preliminaries floor doors).
What causes door A opening slippage in DMG Pitagora 4.0 Control Systems?
If you're experiencing slippage with Door A opening in your DMG Control Systems, check the following: 1. The Door open limit switch (FOA) and its wiring. 2. The door operator power supply and fuses. 3. The door open contactors (ROA).
What to check if door B opening slippage occurs in DMG Pitagora 4.0 Control Systems?
If Door B is experiencing opening slippage in your DMG Control Systems, check the following, similar to Door A: * Signals (FOB) * Signals (ROB)
How to check the motor temperature sensor in DMG Pitagora 4.0 Control Systems?
To address issues with the motor temperature sensor in your DMG Control Systems, check the inputs (TH1, TH2), sensor connections, and the state of the motor’s temperature sensor.
What causes contactors to be blocked in DMG Pitagora 4.0 Control Systems?
To troubleshoot blocked contactors in DMG Control Systems, check: 1. The series of auxiliary contacts (NC) of the power contactors and other cables in series on the circuit CCO and CCOB. 2. The CCO and CCOB circuit wiring. 3. The connection of the CCO and CCOB on the board.
How to reset parameters memory in DMG Pitagora 4.0?
If you're having issues with the parameter memory in your DMG Control Systems, reset, re-enter, and record all parameters.
Essential safety guidelines for product installation and usage.
Guidelines for installing the control panel indoors and its enclosure protection.
Details of the 32-bit control board, its technology, and applications.
Overview of the control system's core capabilities like floor control, CAN bus, etc.
Functionality of the removable module for viewing and editing control panel parameters.
Alternative access method using a removable keypad (PlayPad) for configuration.
Alternative method for accessing the controller via the Fusion Application.
Structure and navigation of the V3 screen interface for system settings.
Accessing system status and detailed fault logs for diagnostics and troubleshooting.
Viewing I/O status and accessing configuration parameters for system setup.
Configuration options for special functionalities like fire-fighters operations and fire detection.
Settings related to elevator car positioning systems, including encoder and traditional methods.
Parameters and settings specific to the FUJI FRENIC LIFT VVVF inverter.
Detailed list of faults, their descriptions, types, and recommended remedies.
Information on ELGO LIMAX 33 CP Absolute Encoder and DMG Encoder systems.
Examples and configurations for setting up multiplex elevator systems.
Motor tuning procedures and parameter settings for FUJI FRENIC Lift VVVF controllers.
Details on setting UCM monitor parameters for uncontrolled movement detection.
Links to download the full PDF manual in different languages.
General| Brand | DMG |
|---|---|
| Model | Pitagora 4.0 |
| Category | Control Systems |
| Language | English |
To Next Page