Need help?Do you have a question about the DOD Technologies ChemLogic 1 and is the answer not in the manual?
General| Operating Temperature | -20°C to 50°C |
|---|---|
| Data Logging | Yes |
| Alarms | Audible and visual alarms |
| Measurement Range | Dependent on target gas and Chemcassette. Consult specific sensor module datasheet. |
| Accuracy | Dependent on target gas and Chemcassette. Consult specific sensor module datasheet. |
| Weight | Approx. 4.5 kg |
Explains various warning labels and their meanings for safe operation.
Highlights specific danger zones on the equipment with associated warnings.
Provides guidelines for choosing an appropriate installation site for the CL1/CL2.
Offers detailed instructions and recommendations for safely lifting the unit.
Provides a step-by-step checklist for configuring the CL1/CL2 for operation.
Explains how to navigate and operate the CL1/CL2 using the keypad and display.
Describes the different types of messages displayed for alarms and faults.
Illustrates the menu structure for navigating the CL1/CL2 system.
Describes the main menu options for normal operation.
Details how to initiate gas analysis and navigate the analysis screen.
Explains how to view and manage system fault messages.
Describes how to view and manage gas alarm messages.
Explains how to set and view alarm levels for gas detection.
Outlines the screens for configuring the CL1/CL2 for operation.
Explains the Tape Saver Mode options to reduce tape advancement.
Describes the function and configuration of latching relays for alarms.
Describes how to select the gas and range for monitoring.
Details the service menu for advanced configuration and diagnostics.
Details the process for manually calibrating the unit's optics.
Explains how to change passwords for Setup and Service menus.
Details the procedure and safety precautions for accessing the service door.
Provides instructions for handling and replacing the ChemLogic paper tape.
Details the types of filters required for different gases and their replacement schedule.
Explains how to install and remove Micro SD cards and the required formatting.
Provides instructions for formatting Micro SD cards for the CL1/CL2.
To Next Page