5.3 Menu Overview CL1/Cl2
Note 1: The setup menu is not password protected by default.
Note 2: The service menu is password protected by default.
Passwords can be changed/cleared in the Password screen on the Service Menu (Section 5.6.3)
5.4 Power-on Initialization
When the CL1/CL2 is powered on it will begin with an initialization screen (figure 5.4) which is followed by the
restart screen (figure 5.5).
If the operator touches the <MENU> soft key before the timer reaches 0 the Main Menu (section 5.5.1 )
appears otherwise after a timeout the system will automatically start analysis (section 5.4.1)
To Next Page
Loading...