DOD Technologies ChemLogic 1 - Grease Application

35
DC-ITD-CL1andCL2MAN01-2018.A www.dodtec.com
NOV 2018 815-788-5200
CL1 & CL2 Manual
6.8 Grease Application
The cam attached to the gate motor should be greased every 6 months to prevent wear. Apply a small
amount of number 2 type petroleum or synthetic grease to the rounded portion of the cam. – See Figures 6.5
below:
Figure 6.5
Top of gate mechanism
Bottom of gate mechanism