DOD Technologies ChemLogic 1 - Chapter 2 - Features; 2.1.1 Warning Labels, Descriptions, & Danger Zones

9
DC-ITD-CL1andCL2MAN01-2018.A www.dodtec.com
NOV 2018 815-788-5200
CL1 & CL2 Manual
Chapter 2 – Features
2.1 External Layout
Figure. 2.1
2.1.1 Warning Labels, Descriptions, & Danger Zones
The below table references all warning labels and their meanings that may be encountered while
operating and servicing the ChemLogic
®
1 and 2 continuous gas detection equipment.
WARNING:
Hot Surface. This surface will be hot to touch and may cause injury. Please avoid or
take caution when working near this zone.
WARNING:
Protective Earth Ground. Terminal Intended for connection to external conductor
for protection against electric shock in case of fault.
ATTENTION:
Please read operators manual for all instruction for this machine. If manual is not in
country’s native language, requested updated manual before use of equipment.
14 pin
I/O Connector
A/C Power &
Switch
ChemLogic® Tape
Maintenance Door
Take-up reel
Exhaust Outlet
Keypad & Display
Gas tubing inlet
(underside)
Door latches
(side of unit)