MAINTENANCE AND FAULT FINDING
L025317 Issue 5 July 2014 5-13
3176 Object has
invalid attributes.
Object may reference
another text/barcode
object that does not
exist or uses a
dynamic text tag that
is undefined. This
fault can also appear
if you try to cross-link
multiple text-objects.
Check for invalid attributes.
3177 Failed to compile
referenced
object.
General software
fault.
Contact Domino.
3178 List overflow:
project too large.
The number of
vectors for marking
the project is too
high.
Reduce the number of
vectors by reducing
resolutions or increasing the
maximum vector length etc.
3179 Mark limit
reached.
The predefined limit
of marks has been
reached
This message is displayed
when you print from a file and
the end of the file has been
reached or if you have
counters enabled that have
“Disable Marking” configured
if they reach their end value.
3180 Print failed. General fault. Contact Domino.
3181 DSP failure. The DSP hardware
cannot be contacted
for transferring
vectors.
Ensure that the boards are
fitted correctly.
3182 Print timeout. The current print has
lasted longer than
the timeout for a
print as defined in
the system setup.
Increase the timeout value or
turn the timeout off by setting
the value to 0.
3183 Missing
“printstart”
parameter set
The usage of the
“printstart”
parameter set for the
first polygon in the
print has to be
selected.
Define a parameter set with
this name or uncheck this
option.
3184 Barcode Error
Wrong code
length.
The barcode type
needs a specific
length of input data.
Change input data or code
type.
3185 Barcode Error
Unrecognised
code type.
General software
fault.
Contact Domino.
Status Message Cause Suggested Action
To Next Page
Loading...
Need help?
General
