Doms PSS 5000 Hardware Configuration Guide

PSS5000/CONF/804473/40 21 of 54
PSS 5000 – Hardware Configuration Guide
Selecting the CPU Board and Interface Modules
Tokheim Current Loop, 10/20mA (act.) DSB416 129767 16
Current Loop, 20mA (pas.) DSB408 Replaced
DSB520 143357
RS232 DSB357 126879
Tokheim ELC RS485 DSB453 133768 16
DSB501 142012
Tokheim Kaizen RS485 DSB453 133768 16
DSB501 142012
Current Loop, 20mA (pas.) DSB520 143357
Topaz RS485 DSB453 133768 16
Topaz 2 RS485 DSB453 133768 64
Wayne Autocourt/Ferranti Current Loop, 20mA DSB356 Replaced 24
DSB517 143186
Wayne Dart RS485 DSB453 133768 20
DSB501 142012
Current Loop, 20mA DSB517 143186
Wayne Europe/Ljungmans
(Current Loop)
Current Loop, 40mA DSB415 Replaced 16
Current Loop, 30mA DSB475 136841
Note:
1
: This module may only be used in existing configurations where the devices are connected in a loop, and it is
not possible to reconfigure the cables. Contact support@doms.dk before you select this module.
Protocols Interface Type HIM Stock No. Devices/Port

Doms PSS 5000 Specifications

General

Brand	Doms
Model	PSS 5000
Category	Controller
Language	English