DoorKing 6500 Series - 1.3 Installation Layouts

6500-065-J-7-18
9
3”
1.3 Installation Layouts
22”
28”
48" Gate Attachment Point - Gates up to 22 Ft.
15”
60”
90°
Arm Calculations
Closed Gate
Open GateOpen Gate
Measured Length
Drive Arm
67.94” / 2 = 33.97 (round number up) = 34 inches
Connecting Arm
67.94” + 17.61” - 33.97” = 51.58 (round number down) = 51.5 inches
Note: Arm length is measured from center hole to center hole.
“Actual” arm length will be longer.
Actual Length
Arm
48”
Arms in Open Position
Arms in Closed Position
Hinge
6”
17.61”
67.94”
Closed Gate
Drive Arm
Connecting Arm
37”
51.5”
Connecting Arm
34”
Drive Arm
Note: Maximum usable connecting arm length is 58.5 inches.