A Series Diesel Engine Lubricating System Flow 127
12mm
Install the pan and gasket.
Torque Value: 25.5Nm [19 ft-lbs]
17mm
Install the drain plug.
Torque Value: 78 Nm [59 ft-lbs]
Fill the engine with oil. Run the engine and check for
leaks.
Stop the engine and check the oil level with the
dipstick.
Oil Pump – Replacement
Preparatory Step:
z Remove the drive belt.
Note : Removal is easier if the crankshaft pulley is
loosened before removing the belt.
To Next Page
