Safety Section
-18-
The “Survive in tipover” warning is located on the
overhead guard. It shows the proper use of the
operator restraint system.
Seat Adjustment
Move the lever, slide the seat to the desired
position, and release the lever.
Adjust the seat before operating the lift truck. After
adjusting, set the seat to make sure it is properly
locked. Do not adjust the seat while the truck is in
motion.
WARNING
Do not place your hand or fingers under the
seat. Injury may occur as the seat moves up
and down.
If Optional Suspension Seat (weight
adjusting type) Equipped
Forward and Backward Adjustment
The seat can be adjusted by pushing the lever on
the right side of seat.
Adjust the seat before operating the lift truck.
After adjusting, set the seat to make sure it is
properly locked. Do not adjust the seat while the
truck is in motion.
Forward and Backward
To Next Page
Loading...
Need help?
General
