Maintenance Section
-212-
8. Inspect the cooling system for leaks, worn
hoses and debris buildup.
9. Inspect engine compartment for oil, coolant and
fuel leaks.
10. Inspect the forks.
Visually inspect forks for cracks, especially in the
heel section, around the mounting brackets, and
all weld areas.
Inspect for broken or jagged fork tips, bent or
twisted blades and shanks.
Make sure positioning lock is in place and
working.
Lock the forks in position before using the truck.
See Step 7 of “Forks” in “Every 2000 Service
Hours or Yearly”.
Remove all defective forks from service.
Mast Channels – Lubricate
The channels on the roller-type mast require a
break-in period. Apply a light film of lubricant on the
channels where the rollers ride. This will prevent
metal peel until the rollers set a pattern.
To Next Page
Loading...
Need help?
General
