Operating Instructions Operating & Maintenance Manual
47
4. Restricted Air Filter: Alarm indicator lamp. Indicates engine/compressor air
inlet filters need service.
5. High Engine Coolant Temp: Fault indicator lamp. Indicates shutdown due to
high engine water temperature.
6. Spare
7. Low Fuel Level: Fault indicator lamp. Indicates shutdown due to low fuel level.
Lamp blinks at low fuel warning.
8. Compressor Malfunction: Fault indicator lamp. Indicates shutdown due to
compressor system fault. Refer to Fault Code List.
9. Low Battery Voltage: Alarm indicator lamp. Indicates battery or charging
system requires service.
10. Engine Malfunction: Engine Fault code. Refer to service card or engine
manual for codes and service requirements.
11. Malfunction Code (4 Digit): Compressor or engine fault. Refer to manual for
list of codes and service requirements.
Alert Shutdown
Condition Code Light (Blinks) Code Light (Steady)
Delay
(sec).
Engine Speed <900 RPM 1 CPRSR Malf. 30
Engine Speed>2300 RPM 2 CPRSR Malf. 30
Engine Crank Time Exceeded 3 CPRSR Malf. 0
Intake Manifold Temperature >
180 def. F
6 CPRSR Malf.
Engine Not Responding To
Throttle Command
10 CPRSR Malf.
To Next Page
Loading...
