DOPOD U1000 - Phone Settings

85
5
Managing Your Pocket PC Phone
To adjust the brightness of the backlight
1. Tap the battery icon ( ) on the Today screen.
2. On the Power settings screen, tap Menu > Backlight.
3. On the Brightness tab, move the slider right to increase the
brightness, or left to decrease the brightness.
To set the backlight to dim after a time delay
1. Tap the battery icon ( ) on the Today screen.
2. On the Power settings screen, tap Menu > Backlight.
3. Tap the Battery power tab, or the External power tab.
4. Select the Turn off backlight if device is not used for check box, and
specify the time delay.
Phone settings
You can customize phone settings, such as the ring type and ring tone to
be used for incoming calls, and the keypad tone to be used when entering
phone numbers. Open the Phone program to customize these settings.
To change the ring tone
1. On the Phone screen, tap Menu > Options > Phone tab.
2. In the Ring tone list, tap the sound you want to use.
Tip:
To use custom *.wav, *.mid, *.mp3, or *.wma files as ring tones, use ActiveSync
on your PC to copy the files to the /Windows/Rings folder on your device. Next,
select the sound from the Ring tone list. For more information about copying files
to your device, see ActiveSync Help on your PC.
To change the ring type
You can change the way that you are notified of incoming calls.
1. On the Phone screen, tap Menu > Options > Phone tab.
2. In the Ring type list, tap the desired option.