88
5
Managing Your Pocket PC Phone
• If an installation wizard does not start, you will see an error
message stating that the program is valid but that it is designed
for a different type of computer. You will need to copy this
program directly to your device. If you cannot find any installation
instructions for the program, use ActiveSync to copy the program
file to the Program Files folder on your device.
To remove programs
You can only remove programs that you installed. Programs that come with
your device cannot be removed.
1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the program you
want to remove, and tap Remove.
3. Tap Yes. If another conrmation message appears, tap Yes again.
5.3 Managing Memory
You may need to stop a program if it becomes unstable or the program
memory is low.
To see how much memory is available
• Tap Start > Settings > System tab > Memory.
• On the Main tab, the amount of memory allocated to le and data
storage versus program storage is displayed, as well as the amount of
memory in use versus the available memory.
To see available storage card or Microdrive memory
You can see how much memory is available on the Microdrive or a miniSD
card that is inserted in your device.
1. Tap Start > Settings > System tab > Memory.
2. Tap the Storage Card tab.
3. Tap the list box and then select the storage media whose information
you want to see.
Try the following to free memory on your device:
• Close programs you are not currently using.
To Next Page
Loading...