EasyManuals Logo

Dorma ED 100 Mounting Instructions

Dorma ED 100
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
DORMA
DORMA
2
DORMA
ED 100/250
Contents
Page
1. Foryoursafety 2-4
2. Technicalspecifications 5-6
3. Systemsetup 7
4. Accessories 8
5. Mountingonhingesidewith12.5mmpivotpin 9
6. Mountingonhingesidewith25mmpivotpin 10
7. Mountingonoppositehingeside 11
8. Installationinstructions 12-16
9. Connectiondiagram 17
10. Commissioning 18-20
11. UpgradeCards 21-22
12. Parameterisation/Service 23-29
13. Diagnosis/Troubleshooting 30-31
14. Errormessages 32-34
15. Furthermounting 35
16. Option:radioreceiver 36
17. Option:Double-leafdoor 37-39
18. Option:Strainrelief 40
Translation of original operating instructions
1. For your safety
Thisdocumentationcontainsimportantinformationregarding
themountingandthesafeoperationofthedoorsystem.
Readtheseinstructionscarefullybeforeoperatingthe
ED 100/250.
It is important for your personal safety to abide by all
enclosed instructions.
Anincorrectlyperformedinstallationmightcauseserious
injuries.
Usingcontrolelements,makingadjustmentsorperforming
proceduresthatarenotdescribedinthisdocumentation
mightcauseelectricshocks,dangercausedbyelectric
voltage/currentand/ordangerduetomechanicalincidents.
Pleasekeepthesedocumentsforfurtherreferenceandhand
themovertothepersoninchargeincasethesystemis
transferredtoanotherparty.
Explanation of symbols
NOTE This symbol underlines important
information that may facilitate your
work.
REMARK This symbol warns you of possible
system damage and explains how to
avoid this damage.
WARNING This symbol indicates dangers that
might cause personal or material
damage or even kill people.
Intended application
Aselectromechanicalswingdooroperators,theED 100 and
the ED 250 are only designed to open and close interior
swing doors with a door-leaf weight of up to 100 and 250 kg
respectively.
Simplyselectthesuitableversionaccordingtoyourprevailing
door-leafwidthandweight.
Bothoperatorsaresuitableforinstallationaspull-version
withEDslidechannelsetandaspush-versionwiththe
EDstandardarm.
Theclosingforcepathshavebeenoptimisedforthe
respectivewaysofmountingandcomplywiththe
requirementsofDIN18263part4.
Pleaseensurethatthesystemisapprovedforinstallationat
therespectivedoorbeforeinstallingthesystematafireor
smokedoor.
Beforeyoustartwiththeinstallationofthesystem,please
ensurethatyouroperatorissuitablefortheprevailing
doorsituationasexplainedinthetechnicalspecifications
inchapter2andthatthedoorisequippedwithadequate
hingesforoperationwithanautomaticoperator.
Themaximumcablelengthforexternalcomponentsmust
notexceed30m.
Limitation of liability
TheED 100/250 may only be used according to their
specified intended application. DORMA GmbH + Co. KG
will not accept any liability for damage resulting from
unauthorised modifications of the ED 100/250. Furthermore
components/accessories that have not been approved by
DORMA are exempted from liability.

Other manuals for Dorma ED 100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dorma ED 100 and is the answer not in the manual?

Dorma ED 100 Specifications

General IconGeneral
Adjustable Closing SpeedYes
Latching SpeedAdjustable
TypeElectromechanical
Power Supply230 V AC, 50 Hz
Fire RatedYes
BackcheckAdjustable
Delayed ActionAdjustable
Hold-Open FunctionYes
FinishSilver

Related product manuals