English
Assistance settings
Confirm with "0"
You can activate the Confirm with "0" function. This is especially recom-
mended if there is a risk that the assistance call is answered by a voice
mail or answering service. If the recipient doesn’t press
0
within 60 sec-
onds the call will be disconnected and the next number in the sequence
will be called. If the recipient presses
0
within 60 seconds, the call is
confirmed and no further call attempts will be made (assistance se-
quence interrupted).
1. Press Menu
Settings Assistance Confirm with "0".
2. Select On to enable, or Off to disable.
3. Press OK to confirm.
Signal type
Select the notification signal type for the assistance sequence.
1. Press Menu
Settings Assistance Signal type:
• High to use loud signals (default).
• Low to use one low signal.
• Silent no sound indication, like a normal call.
2. Press OK to confirm.
Messages
Create and send text message (SMS)
Note! Before you can send any text messages, you need to save your
message centre number. The number to your service centre is supplied
by your service provider and is usually set on the SIM card. If not, you can
enter the number yourself. See SMS centre, p.27.
1. Press shortcut button
,
or press Menu
Messages Create new SMS.
2. Write your message, see Enter text
, p.7, then press To.
3. Select a recipient from Phonebook.
Alternatively, select Enter number to add recipient manually and
press Done.
4. Press Add to add more recipients.
To Next Page
Loading...
