Doro 6030 - Sound and Display Settings; Audio Setup for Hearing Aid Compatibility; Customize Ringtones and Alert Types

English
Sound & Display
Note! Silent needs to be set to Off to access Tone setup, Volume, Alert
type and Extra tone.
Audio setup
If you use a hearing aid or have hearing difficulties when using the device
in a noisy environment, you can adjust the audio settings.
1. Press Menu
Settings Sound Audio setup:
• Normal for normal hearing in normal conditions (default).
• High for moderate hearing impairment or use in a very noisy
environment.
• HAC mode for use with hearing aid.
2. Press OK to confirm.
Note! Try different settings to find the one that suits your hearing the
best.
Tone setup (ringtone)
Select a ringtone with the best tone curve adjustments and frequencies
to best fit your needs.
1. Press Menu
Settings Sound Tone setup.
2. Select Ringtone.
3. Use
/ to select one of the available melodies, the melody will
be played.
4. Press OK to confirm or Back to discard changes.
Tip: Set up the Alarm, Message tone, Keypad tone, Closing tone,
Opening tone, Power on and Power off in the same way.
Ringtone volume
1. Press Menu Settings Sound Volume.
2. Use
/ to change the ringtone volume.
3. Press OK to confirm.
Silent
1. Press Menu
Settings Sound Silent.
36