©
DOSATRON INTERNATIONAL S.A.S / 35
©
DOSATRON INTERNATIONAL S.A.S / 36
EN
INTRODUCTION
Regulatory framework ............................................................... 38
MARKING / IDENTIFICATION / CHARACTERISTICS
Reference codification ............................................................... 42
ATEX marking............................................................................ 43
Specifications ............................................................................ 45
INSTALLATION
Precautions .............................................................................. 47
Assembling the Dosatron .......................................................... 50
Installation hints ......................................................................... 53
STARTING UP/ OPERATING
Using for the first time ............................................................... 54
Operation ................................................................................... 54
Adjusting the injection rate ....................................................... 55
Conversions............................................................................... 55
By-pass option .......................................................................... 55
MAINTENANCE
Recommendations..................................................................... 56
How to drain the Dosatron ........................................................ 57
Fitting the suction tube .............................................................. 57
Cleaning the motor piston ........................................................ 57
Checking the seals in the injection assembly ........................... 58
Checking the dosing seal .......................................................... 58
Cleaning and re-assembling the suction valve seal .................. 59
TROUBLESHOOTING .............................................................. 60
LIMITED WARRANTY .............................................................. 62
Summary