©
DOSATRON INTERNATIONAL S.A.S / 53
INSTALLATION HINTS
EXCESSIVE FLOW (as an indication)
If your DOSATRON clicks more than 46 times in 15 seconds (meaning 23
cycles), you are close to the maximum flow limit
If you need more flow, you must install a DOSATRON with a superior capacity of
flow.
The DOSATRON can be connected
to the main water line directly
(Fig. 4) ; on a by-pass (Fig. 5),
recommended.
If your flow rate is above the
operating limits of the DOSATRON,
see EXCESSIVE FLOW.
To prolong the working life of the
DOSATRON it is advisable to install
a filter (ex.: 300 mesh - 60 microns
depending on your water quality)
upstream.
This is imperative if the water
contains impurities or particles,
especially if the water comes from
a well.
A filter is recommended and
required for the warranty to be
valid.
Installing the DOSATRON on a
bypass enables clean water to
be supplied without operating the
DOSATRON and the DOSATRON to
be easily removed for maintenance.
When connecting an
installation to the public
water supply, you must
respect the rules and
regulations in force in the
country.
Fig. 4
Valve
Valve
Filter
Filter
Check
valve
To Next Page
Loading...
