dosatron D3 Series - ATEX Marking

©
DOSATRON INTERNATIONAL S.A.S / 43
Equipment group Equipement
category
Flammable substances Protection level
I
(Mining)
M1 Methane Dusts Very high
M2 Methane Dusts High
II (Surface Industry)
1
Gases, vapours, mists,
dusts
Very high
2
Gases, vapours, mists,
dusts
High
3
Gases, vapours, mists,
dusts
Normal
ATEX MARKING
Serial number
Warning : Potential danger of electrostatic loads
– See instructions on the owner manual.
Do not wipe the dispenser with a dry cloth.
D
3
I
L30
00
EX
3
m
3
/h
●
0.
0
3
-
0
.3%
0.03 to 0.3% [1:3000 to 1:333]
10 l/h to 3 m
3
/h
0.30 to 6 bar
0.003 l/h to 9 l/h
40°C
Injection rate:
Operating flow:
Operating pressure:
Concentrated
additive injection:
Maximum temperature:
DOSATRON INTERNATIONAL S.A.S - Rue Pascal. BP 6. 33370 TRESSES France
II 1 GD c IIB/IIIC T6 T85°C
I M1
Certificat : Ineris 14ATEX0066X
0080
Protection level
Atmosphere type
Equipment category
Equipment group
Gas group
Dust group
Temperature category
Certifying approved organisation name
Certification number
Compliance with European Directives, CE marking
Number of the organisation qualified
for delivering UE-type declaration of conformity