/ 17
4. Installation location
• The DOSATRON and the dosing additive must be accessible at all times.
Their installation must under no circumstances present a pollution or
contamination risk.
• It is recommended that all water pipes are marked showing that the water
contains additives and with the wording: “CAUTION! Non-potable water”
This wording will not be needed for drinking water applications.
5. Maintenance
• After use, we recommend flushing with clear water.
• Annual maintenance will extend the service life of your DOSATRON.
Replace the dosing seals and the additive suction hose at least once a year.
6. Service
• This DOSATRON was tested prior to packaging.
• Replacement sub-assemblies and packs of seals are available upon
request.
• Do not hesitate to call your distributor or DOSATRON for any after-sales
services.
To Next Page
Loading...
