/ 33
REMOVING THE SUCTION HOSE
WARNING: Before performing any work on the DOSATRON, you must
read to the Precautions section, page 15.
NOTA: Before dismantling, and to avoid any contact with the injected
additives, turn on the DOSATRON and allow it to draw in clear water in order
to rinse the injection assembly.
D3IL10
• Unscrew the nut at the bottom of the injection assembly
• Remove the hose from the suction valve fitting by pulling it downwards.
• Reassemble in the reverse order. If necessary, please refer to Connecting
the suction hose, page 23.
fig 28 fig 29
To Next Page
Loading...
