Dowell iPack C3.3 - Product Appearance and Mechanics; Appearance and Terminals; Mechanical Features

5
Detect the voltage and temperature of cell, the voltage and current of battery.
• SOC estimate:
Indicate the precise volume of remaining electricity.
• Alarm:
Alarm when overvoltage, under voltage, overcurrent, over temperature or under temperature occurs.
• Protection:
Protect against over voltage, under voltage, over current, over temperature, under temperature, cell fault
and hardware failure.
• Report:
Report alarm messages and operation data to PCS via CAN network ports.
• Parallel connection:
Support a maximum of 6 batteries in parallel connection.
• Power-off triggered by fault:
• Forced power-off:
When battery does not connect to mains supply, hold POWER button for two seconds and battery powers
• Activation:
2.3 Appearance and Terminals
The battery is an energy storage unit composed of cells, mechanical parts, battery management system (BMS)
as well as power and signal terminals.
Table 2-1 Mechanical features
Parameter Value
Dimension W445*D131*H399.6 mm
Weight Around 30kg
Installation Rack-mounted installation or Wall-mounted bracket installation
445
399.6
131
3
4
5
1
2
6
7 8