Dowell iPack C3.3 - Troubleshooting; Troubleshooting Guide

24
8.3 Troubleshooting
PACK
Status
PACK
Information
Display Logic
Remark Duration
LED1 LED2 LED3 LED4 LED5
Remote / /// / LED5 depending
same as the
normal status
/
Bootload
2Hz 1S-2S
Starting Master/Slave
Master 3S~30S
/ / /
Slave 1
/ /
/ Slave 2
/ /
Slave 3
/
/ / Slave 4
/
/ Slave 5
/
/ Slave 6
Application
Mode
checking
Parallel or single
application mode
checking success
SOC Display
Blink 5 times 2S
Fault Cell Over Voltage / ///
LED5 depending
on the previous
status, blink
2 times, then
shutdown
Shutdown /
or
Return after 10s
Click Display PACK ID Display PACK ID off Return after 10s
: Blue LED Blink : Blue LED On : Blue LED flash display
: Red LED Blink : Red LED On